Roof Types

Roof Types For

Southwest Florida

Tile, asphalt shingles and metal are options for pitched roofs. A low-slope lanai or commercial building often needs a membrane. Start with the shape of your roof, then compare the look, cost and upkeep of the systems that fit.

Call (239) 345-3429

Get An Instant Roof Quote

  • Tile, Shingle, Metal & Flat Roofs

Naples, Bonita Springs, Fort Myers, Cape Coral, Florida

Roofing since 1997

Florida roofing license CCC1334737

Explore The Four Roof Types

Look at the surface up close.  Then follow the material that matches your roof or the one you are considering.

Tile Roofing

Architectural shingles have a layered edge that gives a pitched roof depth without the weight of concrete tile. They're often the first option homeowners price. When comparing bids, ask which shingle is included and how the installer will handle the roof edges and the flashing around vents.

Shingle Roofing

Assessment of missing, lifted, or damaged shingles and related leak concerns. The condition of the surrounding shingles helps determine whether a localized repair is practical.

Metal Roofing

Standing-seam panels give a roof long, clean lines. Stone-coated steel offers a different look, including profiles that resemble tile. Near salt water, ask which metal, finish and fasteners the manufacturer recommends for your address and which coastal conditions its warranty covers.

Flat Roofing

A roof over a lanai, addition or commercial building can look flat from the ground. Its slight pitch directs rain toward a drain or an edge. A membrane such as TPO, short for thermoplastic polyolefin, forms a continuous covering across that shallow slope. Seams, drains and wall connections deserve a close look.

Roofing Materials At A Glance

Two materials may suit the same roof and still come with very different costs.  Use these differences to narrow your list before you compare written quotes.

Roof Type

Typical Fit

Upfront Cost

What To Watch

Tile

Pitched homes where the tile profile matters.

Often higher than asphalt shingles. The tile profile, attachment and roof structure affect the quote.

Check for slipped or cracked tiles and ask about the condition of the underlayment.

Asphalt Shingle

Pitched homes where upfront cost comes first

Often the lowest initial cost of the three pitched-roof options. Deck repairs and tear-off can change the total.

Have lifted tabs, missing shingles or exposed flashing checked after wind damage.

Matal

 Homes or commercial buildings suited to the chosen panel system

Usually costs more upfront than shingles. Metal type, seam design and finish affect the price.

Check seams, wall connections and the seals around roof penetrations. Exposed-fastener systems also need their fasteners checked.

Flat or Low-Slope

Covered lanais, additions and low-slope commercial roofs

Price it as its own roof section. The membrane, insulation and drainage work can all change the scope.

Track where water lingers after rain and have a roofer check drains, seams and wall flashing.

Before You Settle On A Material

Look at each roof section

A Naples home can have tile over the living room and a much shallower roof over the lanai. Ask how rain moves from the upper roof to the lower one and how the two coverings meet. Those details belong in the quote for that house.

Check what your community allows

If your HOA reviews exterior changes, get its current list of approved profiles and colors before you pay for samples. A flat concrete tile and a high-barrel tile can look quite different from the street.

Put the two scopes side by side

Look for the exact product, tear-off, underlayment or insulation, flashing, disposal and warranty terms. Ask how the contractor will price damaged decking discovered after tear-off. It is easier to judge a price difference when you know what each bid includes.

Roof Type Questions

Which roof type is best for a Southwest Florida home?

Start with the pitch of each roof section. On a pitched home, shingles often suit a tighter budget, tile offers a choice of profiles, and metal can give you either a panel or tile-like finish. On a low-slope section, compare systems designed for slow drainage. Your home's structure, coastal exposure and HOA rules can narrow the choice.

Can I switch from shingles to tile?

Sometimes. Concrete and clay tile can add substantial weight. Before choosing a profile, have the existing structure evaluated for the proposed tile system and check any HOA restrictions. Ask for any reinforcement to be priced separately so you can see the full cost of switching.

How do I compare roof materials for hurricane winds?

Ask how the specific roof system is rated and attached for your building and location. Deck attachment, edges, underlayment and flashing all play a part. A general wind rating on a brochure tells you less than the product approval and installation details for the roof being quoted.

Is metal roofing a good option near salt water?

It can be. Coastal suitability depends on the panel metal, protective finish, fasteners and the manufacturer's exposure limits. Give the roofer your property address and ask to see the relevant coastal warranty terms in writing.

Does one cracked tile mean I need a new roof?

A single cracked tile can often be replaced if a matching tile is available and the layers below are sound. Recurring leaks or damage across several areas call for a closer look at the underlayment and flashing. Start with a roof repair assessment before committing to a replacement.

Which Roof Would Work On Your Property?

Based in Fort Myers. Serving Cape Coral, Naples, Bonita Springs, Estero and the surrounding Southwest Florida communities.

Tell us your city, what covers the roof now and what you'd like to change. If you're still deciding between a repair and a replacement, tell us what you've noticed. We'll help you narrow the next step.